Lift Forks

1 - 46 of 46 items
Sort By:
4″x4″ Single Hole Receiver, Heavy Duty 5×5 Single Hole Receiver, Heavy Duty 6×6 Single Hole Receiver, Heavy Duty
4″x4″ Single Hole Receiver, Heavy Duty5×5 Single Hole Receiver, Heavy Duty6×6 Single Hole Receiver, Heavy Duty

HTS-250270HD-1

Heavy Duty 4 “x 4” Single Hole Receiver

HTS-250270HD-2

Heavy Duty 5 “x 5” Single Hole Receiver

HTS-250270HD-3

Heavy Duty 6 “x 6” Single Hole Receiver

$234.75

$234.75

$234.75

Bridge with Plate Only - Fifth Wheel Adapter End Cap w/ Chain  Grab Hook - Fits 4" X 4" Crossbar End Cap w/ Chain  Grab Hook - Fits 5" X 5" Crossbar
Bridge with Plate Only - Fifth Wheel AdapterEnd Cap w/ Chain Grab Hook - Fits 4" X 4" CrossbarEnd Cap w/ Chain Grab Hook - Fits 5" X 5" Crossbar

HTS-2507300

Accepts Kingpins on RV'S, Horse Trailers and Most Commercial Trailers
Fits most 2" Receivers, 2" Ball Included
Towing Capacity 25,000 Lbs Empty Trailer, Tow Ball 10,000 Lbs

HTS-250217000

PLEASE SPECIFY RIGHT OR LEFT SIDE

HTS-250214000

PLEASE SPECIFY RIGHT OR LEFT SIDE

$827.00

$153.00

$153.00

End Cap w/ Chain  Grab Hook - Fits 6" X 4" Crossbar Extra Low Profile Fork Fifth Wheel Adapter - 23" Center Bridge w/Tow Hitch Only
End Cap w/ Chain Grab Hook - Fits 6" X 4" CrossbarExtra Low Profile ForkFifth Wheel Adapter - 23" Center Bridge w/Tow Hitch Only

HTS-25021500

PLEASE SPECIFY RIGHT OR LEFT SIDE

HTS-822001500

2 3/4" x 2 1/4" x 1 1/2"

HTS-250730023

The 5th Wheel Plate Adapter accept kingpins from RV & horse trailers as well as commercial trailers. Will fit most cross bars with 2″ receivers.
The 2″ tow ball...

$153.00

$236.00

$957.00

Fifth Wheel Adapter - 23" Center Complete Fork Receiver - Fits 3.5" X 3.5" Crossbar Fork Receiver - Fits 5" X 5" Crossbar
Fifth Wheel Adapter - 23" Center CompleteFork Receiver - Fits 3.5" X 3.5" CrossbarFork Receiver - Fits 5" X 5" Crossbar

HTS-250500023

The 5th Wheel Plate Adapter accept kingpins from RV & horse trailers as well as commercial trailers. Will fit most cross bars with 2″ receivers.
The 2″ tow ball...

HTS-250260000

2 Fork Holes for easy hook up - rotate for high/low position

PLEASE SPECIFY LEFT OR RIGHT SIDE

HTS-250231000

2 Fork Holes for easy hook up - rotate for high/low position

​PLEASE SPECIFY LEFT OR RIGHT SIDE

$1,237.00

$298.00

$298.00

Fork Receiver - Fits 6" X 4" Crossbar Fork Receiver - Fits 6" X 6" Crossbar Fork Receiver 3.5 "x 3.5" , Light Duty
Fork Receiver - Fits 6" X 4" CrossbarFork Receiver - Fits 6" X 6" CrossbarFork Receiver 3.5 "x 3.5" , Light Duty

HTS-250221300

2 Fork Holes for easy hook up - rotate for high/low position

PLEASE SPECIFY LEFT OR RIGHT SIDE

HTS-250240000

2 Fork Holes for easy hook up - rotate for high/low position

PLEASE SPECIFY LEFT OR RIGHT SIDE

HTS-25270000-2 Pete Soro receivers have 2 fork holes for easy hook-up . The outer hole is offset and gives you extra width during axle or frame lift. Shifting one receiver from passenger side to the driver’s side will decrease the distance...

$298.00

$394.00

$188.50

Fork Receiver 4″x 4″ Drivers Side Gillis Bus Fork High Stand Fork Receiver - Fits 5" X 5" Crossbar
Fork Receiver 4″x 4″ Drivers SideGillis Bus ForkHigh Stand Fork Receiver - Fits 5" X 5" Crossbar

HTS-250250000 Pete Soro receivers have 2 fork holes for easy hook-up . The outer hole is offset and gives you extra width during axle or frame lift. Shifting one receiver from passenger side to the driver’s side will decrease the distance...

HTS-300510000

The bottom portion of the fork connects to the wheel lift and the top portion of the fork fits into the provided holes that are on the underside the Gillis bus.

HTS-250213200

Available in 3 Sizes with Welded on Grab Hook

PLEASE SPECIFY RIGHT FOR LEFT SIDE

$298.00

$152.00

$336.00

High Stand Fork Receiver - Fits 6" X 4" Crossbar High Stand Fork Receiver - Fits 6" X 6" Crossbar Lift Fork - 2.5" Bus Fork
High Stand Fork Receiver - Fits 6" X 4" CrossbarHigh Stand Fork Receiver - Fits 6" X 6" CrossbarLift Fork - 2.5" Bus Fork

HTS-250213100

Available in 3 Sizes with Welded on Grab Hook

PLEASE SPECIFY RIGHT FOR LEFT SIDE

HTS-250213300

Available in 3 Sizes with Welded on Grab Hook

PLEASE SPECIFY RIGHT FOR LEFT SIDE

HTS-250213000

This unique Bus Fork was specifically designed with a 2-1/2" dia. to fit the torsion bar on the front of a motor coach. It provides a snug fit to the bar without denting or crimping it...

$336.00

$336.00

$138.00

Lift Fork - 2.5" Fork Lift Fork - 2.5" Fork Lift Fork - 3.25" Low Profile Fork
Lift Fork - 2.5" ForkLift Fork - 2.5" ForkLift Fork - 3.25" Low Profile Fork

HTS-250213600

This fork is designed to fit between the U-bolts. This type of lift will prevent the truck from sliding since the U-bolts prevent the fork from moving along the axle...

HTS-250230000

This new fork is a taller version of the most sold 250213600 M.D. Business Trucks fork.

HTS-82200801

The 82200801 fork is a low profile type designed to slide under the low bumper and engage the axle with the longer finger.

$155.00

$164.00

$162.00

Lift Fork - 3.25" Wide Tall Fork Lift Fork - 4" Bus and Tube Fork Lift Fork - 4.5" Wide Short Fork
Lift Fork - 3.25" Wide Tall ForkLift Fork - 4" Bus and Tube ForkLift Fork - 4.5" Wide Short Fork

HTS-82200803

Most towing is performed by lifting the axle. These forks are designed for that purpose but can be used in many other ways. When lifting the axle make sure that the forks are...

HTS-250213500

The new 4″ bus and tube fork is designed to lift at the 4″ torsion tube on the newer MCI and other busses. This fork is also used to lift trucks with tail gate lifts.

HTS-82200807

Most towing is performed by lifting the axle. These forks are designed for that purpose but can be used in many other ways. When lifting the axle make sure that the forks are...

$170.00

$150.00

$166.00

Lift Fork - 4.5" Wide Tall Fork Lift Fork - 5" Axle Bracket Fork Lift Fork - 5.5" Wide Rear Axle Fork
Lift Fork - 4.5" Wide Tall ForkLift Fork - 5" Axle Bracket ForkLift Fork - 5.5" Wide Rear Axle Fork

HTS-82200805

Most towing is performed by lifting the axle. These forks are designed for that purpose but can be used in many other ways. When lifting the axle make sure that the forks are...

HTS-300400000

For use on Newer Hendrickson Steertek Axles

HTS-250212500

Lifting trucks from the rear can sometimes be difficult. Newer trucks are equipped with air ride or air bags which limit the lifting sites. The axle housing is one of the more popular...

$178.50

$188.00

$167.00

Lift Fork - 6.5" Wide Rear Axle Fork Lift Fork - 7" High Stand Lift Fork - 9" Fork
Lift Fork - 6.5" Wide Rear Axle ForkLift Fork - 7" High StandLift Fork - 9" Fork

HTS-250212600

Lifting trucks from the rear can sometimes be difficult. Newer trucks are equipped with air ride or air bags which limit the lifting sites. The axle housing is one of the more popular...

HTS-82200815

High Stands raise the fork to a higher position. The need may arise when the suitable fork is not tall enough to reach the desired lift point, that the stinger hits the bumper before...

HTS-250212900

When you can’t find the right fork try our versatile 9″ tall fork and use the chassis frame as lifting point as shown in the illustration. Here, one finger of the fork enters a hole...

$193.00

$194.00

$195.00

Lift Fork - Axle Bracket Fork Lift Fork - Chain Fork Lift Fork - Clevis Type Bus Fork
Lift Fork - Axle Bracket ForkLift Fork - Chain ForkLift Fork - Clevis Type Bus Fork

HTS-250213900

The new Hendrickson STEERTEK AXLES doesn’t allow use of forks on the axle itself. See Hendickson Technical Bulletin below. Freightliner as well as Vovlo trucks use the new axle...

HTS-NRC-CF

Accepts 1/2" to 5/8" Chain.  Enable Lifting of Trucks with No Axle or Tires.

HTS-300100000

Attaches to Lift & Tow Eyes like GMC, Nova, RTC, an MCI

$180.00

$199.00

$235.00

Lift Fork - Detroit Low Oil Pan Fork Lift Fork - Half Round Fork Lift Fork - Light Duty Receiver
Lift Fork - Detroit Low Oil Pan ForkLift Fork - Half Round Fork Lift Fork - Light Duty Receiver

HTS-300200000

Detroit low oil pan fork, allow clearance for the oil pan.

HTS-82200802

The half round fork is used mostly to lift trucks with tailgates and construction trucks where big cross tubes are part of the body. The photos show (l. to r.) the fork used for a tailgate...

HTS-250270000

Pete Soro receivers have 2 fork holes for easy hook-up . The outer hole is offset and gives you extra width during axle or frame lift. Shifting one receiver from passenger side...

$184.00

$176.00

$193.50

Lift Fork - Self Aligning Spring Fork Lift Fork - Self Loading Fork Lift Fork - U-Bolt Fork
Lift Fork - Self Aligning Spring ForkLift Fork - Self Loading ForkLift Fork - U-Bolt Fork

HTS-82200814

The self aligning spring fork is one of the most popular forks and attaches to the spring itself. Four different positions for the fork lock pin ensure a snug fit. The fork hinging feature...

HTS-82200816

When Trigger Contacts Axle Fork Finger Rotates back into Closed Position.

HTS-300500000

Rear Lift Only

$310.00

$412.00

$138.00

Lift Fork - V-Fork Lift Forks - 4.25" Fork Lift Forks - Super Duty Fork
Lift Fork - V-Fork Lift Forks - 4.25" ForkLift Forks - Super Duty Fork

HTS-82200806

This fork was designed for heavy construction trucks lifting by the axle. When nothing really fit try this very versatile fork.

HTS-250213400

Fits onto Frame or Axle.  Tall frame & axle fork.

HTS-250213800 

The new tube axle on the Ford Super Duty model 2002 require a special fork that prevents the axle from denting. Pete Soro’s new half round fork fits snug around the axle...

$164.00

$200.00

$153.00

Nova Flat Towing Fork
Nova Flat Towing Fork

HTS-261000000

Forms a solid connection with the towed vehicle, 2" x 4" thick stock solid steel shaft for extra strength, Steel shaft fits standard wheel lifts easily, Heavy-duty forged body is...

$244.00